Daily maintenance methods and procedures of the ho

Daily maintenance methods and procedures of packaging machinery and equipment

there are several processes that must be carried out in the daily maintenance of packaging machinery. They are the cleaning, fastening, adjustment, lubrication and corrosion prevention of the equipment. In the normal production process, the machine maintainer should: strictly implement all maintenance work according to the maintenance manual and maintenance procedures of the machine packaging equipment and within the specified period, reduce the wear speed of parts, eliminate the hidden danger of failure, and extend the service life of the machine. China Baowu hopes to lead one of the most active varieties in the plastic industry and technology under the demand of COMAC. The maintenance of machinery includes routine maintenance, regular maintenance and special maintenance. Regular maintenance can be divided into three categories: primary maintenance, secondary maintenance and tertiary maintenance. Special maintenance can be divided into seasonal maintenance and out of service maintenance. The following article will introduce the specific processes and precautions of these types of maintenance work. The routine maintenance of packaging machinery focuses on cleaning, lubrication, inspection and fastening. Routine maintenance should be carried out during and after the operation of the machine. The first level maintenance is carried out on the basis of routine maintenance, and the key work is to lubricate, tighten, and check all relevant parts and their cleaning work. The second level maintenance work focuses on inspection and adjustment. Specifically, check the engine, clutch, transmission, transmission components, steering and braking components. The lower pressure plate is placed on the three-level protection workbench, and the key point is to detect, adjust, eliminate hidden troubles and balance the wear degree of each component. The parts that affect the service performance of the equipment and the parts with fault symptoms shall be diagnosed and inspected, and then the necessary replacement, adjustment and troubleshooting shall be completed. Seasonal maintenance refers to the inspection and repair of components such as the power system (engine), transmission system (spiral shaft and belt transmission), air compression system (check the lubrication and sealing of air compressor), and control system (maintenance of Youte electromechanical control cabinet, which needs to be completed under the guidance of Youte after-sales engineers) before the summer and winter of the packaging equipment every year. Out of service maintenance means that when the packaging equipment needs to be out of service for a period of time due to seasonal factors (such as winter break), cleaning, cosmetic surgery, supporting, moisture-proof, corrosion prevention and other work should be done well

this article comes from the Internet, and the copyright belongs to the original author. It is only for everyone to share and learn. If the author believes that high-performance plastics are involved in creating new trends in the medical industry: safety, environmental protection, precision and infringement, please contact us, and we will delete it immediately after verification