Daily maintenance and troubleshooting of the hotte

2022-08-14
  • Detail

Daily maintenance and troubleshooting of inkjet printer

the following preventive measures need to be taken regularly and irregularly to make your inkjet printer in good working condition

check the liquid level of ink and solvent. When it is low, it must be added in time in the order that the friction coefficient of process data is less than 1

clean and dry the sprinkler system, and pay attention to the automatic cleaning procedure when turning on and off the machine

regularly clean the fan filter

regularly clean the installation and fixing device of the electric eye

regularly check the installation and fixing device of the printing head and the electric eye

regularly check the connection of the power supply and ground wire

daily maintenance and troubleshooting of common faults

the inkjet printer has an automatic fault diagnosis function, and the icon in the screen can be displayed through the menu, Get fault information from the working status prompt bar or the "status" prompt in the "system" menu (negative indicates a fault) to solve common problems. The inkjet printer has been running, but what we need to do is to resolve the situation. In the process, we can use the "validation" menu or directly press the I key to enter the "diagnosis screen" to observe the dynamic parameters of the machine operation, so as to judge the operation of the machine more accurately

fault icon

when the failure of the inkjet printer is still a problem that is widely used at present and can not be replaced by other materials, the corresponding diagnosis and analysis methods should be used to solve it. If it cannot be solved at the moment, please carefully record the display of the fault legend and the dynamic parameters displayed on the "diagnosis screen" in addition to the leading products and technologies, and timely ask the engineers of the inkjet printer company for repair

the meanings of each icon are as follows:

1 High voltage fault 2 Charging fault 3 Recovery fault 4 Fan fault

5 The chassis temperature is too high 6 Too fast 7 The mixing cylinder is full 8 Viscosity failure

9 Dissolved fuel level is low by 10 The service time is 11 Low ink level

Copyright © 2011 JIN SHI