Fire safety assessment personnel training question

2022-08-02
  • Detail

Safety assessor training test questions

safety assessor training test questions

unit:

Name: Score:

1. Fill in the blanks (the following questions are given in brackets, please fill in the correct answers in brackets. There are 18 blanks in total, 1 point for each blank, 18 points in total.)

1. Danger in a narrow sense refers to the combination of the possibility of specific dangerous events in the system and ()

2. According to the document "ajgjzz [2002] No. 45" issued by the State Administration of work safety, safety assessment is divided into safety pre assessment, (), comprehensive assessment of safety status and special safety assessment

3. Safety pre assessment is the process of analyzing and predicting the types and degrees of hazards and hazardous factors existing in the construction project, and putting forward reasonable and feasible safety technology design and safety management suggestions according to the contents of ()

4. "Three Simultaneities" refers to that () of new construction, () and expansion projects of production and business units must be designed, constructed and () at the same time as the main project

According to Article 25 of the law of the people's Republic of China on work safety, mine construction projects and construction projects used for the production and () of hazardous substances shall be subject to safety conditions demonstration and safety evaluation in accordance with the relevant provisions of the state

6. According to the classification and code of hazardous and harmful factors in production process (gb/t), hazardous and harmful factors are divided into 6 categories and 37 sub categories. These six categories are: () conventional scenic spot fatigue strength theory nominal stress method and local stress-strain analysis method, chemical hazard, hazard factor, biological hazard, hazard factor, () hazard, hazard factor, behavioral hazard, hazard factor and other hazards and hazard factors

7. The so-called accident prevention principle mainly clarifies the theoretical system of why () occurs and how to take measures to prevent accidents. It takes () as the research object, and discusses the accident causing factors and their mutual relations, and () and other issues

8. Technical measures to prevent human error: replace human with machine, (), error resistant design, warning and (), etc

9. The characteristics of modern security management are (), (), all-round security management and all-weather security management

10. The risk management specialty provides spring tension and compression testing machine, spring change testing machine, spring fatigue testing machine, hydraulic universal testing machine, and electronic universal testing machine. The test results are shown in Table 2, figure 1-3. The comprehensive solutions of the machine, electronic tension testing machine, impact testing machine, pressure testing machine, and hardness tester are necessary components of the management process, involving many factors. The basic process includes determining the scope and objectives The whole process of hazard identification, (), risk treatment and () is a circular process

II. Multiple choice questions (four answers are given in the following questions, namely, a, B, C and D. at least one of them is correct. Please fill the correct answer in the brackets. There are 10 questions in total, 1 point for each question, totaling 10 points.)

1. Danger is the combination of accident possibility and accident severity, so ()

a. if the possibility of accident is doubled, the danger will be doubled

b. if the severity of the accident is doubled, the risk is doubled

c. the greater the severity of the accident, the greater the danger

d. when the accident possibility is the same, the danger has nothing to do with the severity of the accident

2. Safety evaluation is a behavioral process, which includes: ()

a. feasibility study of the project

b. evaluate the risk degree

c. determine whether the hazard is within the tolerable range

d. construction drawing design of the project

3. The design document for the safety acceptance evaluation of the construction project is based on the project ()

a. feasibility study report

b. proposal

c. construction drawing design

d. design specification

4. According to the regulations on the safety management of hazardous chemicals, the production and storage devices of enterprises producing, storing and using hazardous chemicals shall be subject to regular safety evaluation, among which ()

a. the production and storage devices of highly toxic hazardous chemicals enterprises shall be subject to safety evaluation once a year

b. safety assessment shall be conducted once a year for the production, storage and use devices of highly toxic and dangerous chemicals enterprises

c. safety assessment shall be conducted every two years for production and storage devices of non highly toxic hazardous chemicals enterprises

d. safety assessment shall be conducted every two years for the production, storage and use devices of non highly toxic hazardous chemicals enterprises

5. Special equipment refers to the equipment recognized by the state, which is prone to accidents due to the influence of the equipment itself and external factors, and once an accident occurs, the national government will attach great importance to the vigorous development of the new material industry, and there is a high risk of personal injury, death and major economic losses. The following special equipment are ()

a and elevators

b, plant

Copyright © 2011 JIN SHI